Home / Forums / Sharing / Scripts / Different Pitch Bend Ranges for Up/Down This topic has 2 replies, 1 voice, and was last updated 4 years, 8 months ago by waltercruz. Different Pitch Bend Ranges for Up/Down waltercruzParticipant Posts: 4 May 7, 2017 at 10:39 pm Hi people. what would be the best way to do this? It seems that a script is the way to go? waltercruzParticipant Posts: 4 May 8, 2017 at 5:31 am ok, solved in a different way, using only the modulation mapper 🙂 waltercruzParticipant Posts: 4 May 8, 2017 at 4:27 pm Here’s what I’ve done: The pitch bend range (ratio) is set to the max I used a mapper to ‘quantize’ that range Created a mapper size 3. The middle is the normal state, equals to 0. The bottom one is the bend down stage, that goes to the maximum And this is the bend up, that I limited to sound just like a half-note bend. This reply was modified 4 years, 8 months ago by waltercruz. Reason: changing image size You must be logged in to reply to this topic.