waltercruz

[waltercruz]

Here’s what I’ve done:

1. The pitch bend range (ratio) is set to the max
2. I used a mapper to ‘quantize’ that range
3. Created a mapper size 3. The middle is the normal state, equals to 0. The bottom one is the bend down stage, that goes to the maximum
4. And this is the bend up, that I limited to sound just like a half-note bend.

• This reply was modified 6 years, 11 months ago by waltercruz. Reason: changing image size

[waltercruz]

ok, solved in a different way, using only the modulation mapper 🙂